WWII US Ithaca 1911A1 1911-A1 Du-Lite 45 ACP Semi-Auto Pistol, 1943 C&R
SOLD FOR: $2826
LSB#: 210917MW69
Make: Ithaca
Model: 1911-A1
Serial Number: 876952
Year of Manufacture: 1943 (Pg. 394 of Clawson’s “Colt .45 Service Pistols”)
Caliber: .45 A.C.P.
Action Type: Single Action Semi-Auto fed by Removable Magazine
Markings: The left side of the slide is marked “ITHACA GUN CO., INC. / ITHACA, N.Y.”. The left of the frame behind the magazine release and the top of the slide in front of the rear sight are marked with a “P” acceptance proof. The left side of the frame above the magazine release is marked “FJA” (Frank J. Atwood Lt. Col., Sub-Inspector for Ithaca, Remington Rand and Union Switch). The right side of the frame is marked “UNITED STATES PROPERTY / No 876952”, “M1911 A1 U.S. ARMY”, and at the rear there is an Ordnance mark. The interior of the dust cover has a flaming bomb Ordnance mark, found again under the firing pin plate on the rear of the slide. The left link-lug of the barrel is marked “P”, the right “HS”. The right front bow of the trigger guard is marked “3”.
Barrel Length: 5”
Sights / Optics: The front sight is a short blade with a serrated, ramped rear face fixed to the slide. The rear sight is a square notch dovetailed into the slide.
Stock Configuration & Condition: The grips are checkered brown plastic with reinforcement rings around the screws and reinforcement ribs on the inside. The grips have scattered light wear with infrequent compressed or damaged checkers and tool marks in the reinforcement rings around the screws. There are no chips or cracks. The checkering is generally well defined. Overall, the grips are in about Very Good condition.
Note: The top-left grip screw is seized in its bushing, turning the screw head turns the bushing in the frame. The bushing and frame threads are still strong. The bottom-right bushing’s screw-driver slot is damaged.
Type of Finish: Du-Lite
Finish Originality: Original
Bore Condition: The bore is gray and the rifling is sharp. There is scattered light erosion in the bore.
Overall Condition: This pistol retains about 75% of its metal finish. The finish is thinning at all edges. The most notable finish wear is handling wear in the grip areas and two spots of finish wear on the right frame flat above the trigger and trigger guard. Other surfaces show scattered more minor wear with finish thinning in some areas. There are some scattered light nicks, scuffs and scratches. There is infrequent minor surface oxidation, most notable on the top-left of the slide forward of the ejection port. There is an “idiot mark” below the slide stop. The action shows operational wear. The screw heads are tool marked with serviceable slots. As noted above, the top-left grip screw is seized in its bushing, turning the screw head turns the bushing in the frame. The bushing and frame threads are still strong. The bottom-right bushing’s screw-driver slot is damaged. The markings are generally clear, but the Ordnance wheel is incomplete (as is common). Overall, this pistol is in about Good-plus condition.
Mechanics: The action functions correctly. There is minor play between the slide and frame. This pistol has manual and grip safeties. We have not fired this pistol. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.
Box, Paperwork & Accessories: Included is a brown leather flap-holster and a single 7-round magazine. The holster is marked “US” in oval on the flap and “BOYT . -44-” on the belt-loop assembly. The holster has scattered wear and discoloration, verdigris at the metal parts, and intact stitching. The magazine is marked “L” on the top of the baseplate. The magazine has light operational wear, some minor surface oxidation on the floorplate, intact feed lips and a strong spring.
Our Assessment: The 1911 and 1911-A1 pistols served the military of the United States from 1911 to 1985, through two World Wars and the Korean and Vietnam wars. They gained a reputation as a reliable handgun with plenty of stopping power, and are held in high regard by those who have used them. The design was the end-result of a series of developments by famous gun designer John Browning, starting with the Model 1900. The advances made by Browning were revolutionary at the time, and were so successful that they are considered commonplace today. Browning not only developed first a pivoting and then a tilting barrel to allow for a locked system, he developed the concept of “the slide”, which is now synonymous with semi-automatic handguns. During the inter-war years, the design was further refined with an arched mainspring housing, relief-cuts behind the shortened trigger and some minor changes to other small parts, resulting in the 1911A1. This new model would be the US sidearm during WWII, and saw production by a few different companies. As in the previous World War, Colt and American Arsenals were not able to produce everything that would be required for this war, and production would be contracted to a typewriter company, Remington Rand, a company which made switches and signals for railroads, Union Switch & Signal, and one firearms manufacturer, Ithaca Gun Co. This example was made by Ithaca in 1943, and is one of the earlier guns produced by the Ithaca, New York based company. It has a Du-Lite finish, which would later be replaced by parkerizing and is in the early portion of Ithaca’s first 60,000 gun serial range. It is in about Good-plus condition, retaining about 75% of its metal finish, a decent bore, and strong mechanics, though one of the grip screws is seized in its bushing. With its original finish, this would be a great addition to a collection, especially for 1911 collectors missing an Ithaca with original Du-Lite finish. Please see our photos and good luck!