Christensen Arms Ridgeline FFT Titanium 6.5 PRC 22″ Bolt Action Rifle
SOLD FOR: $1,451.00
LSB#: LSB260518LW002
Make: Christensen Arms
Model: Ridgeline FFT Titanium
Serial Number: 4M03986
Year of Manufacture: Modern
Caliber: 6.5 PRC
Action Type: Bolt Action, Internal Magazine, Hinged Floorplate
Markings: The left side of the barrel is marked “Christensen Arms Gunnison Utah USA”. The right side of the barrel is marked “Ridgeline 6.5 PRC 1-8”. The left side of the receiver is marked “MODEL 14TI”, along with the serial number, the Christensen Arms logo, and Christensen’s address. The floorplate is marked “TITANIUM EDITION”.
Barrel Length: 22″; 24″ with Radial Muzzle Brake installed. Carbon Fiber Wrapped 416R Stainless Steel, Threaded 5/8×24.
Sights / Optics: There are no provisions for iron sights. The top of the receiver is mounted with a one-piece picatinny rail for optics.
Stock Configuration & Condition: The stock is a one-piece Christensen Arms Sporter FFT Carbon Fiber Stock, with a semi-pistol grip, fluted straight comb, black rubber Christensen Arms buttpad, and sling studs front and rear. The LOP measures 13 1/2″ from the front of the trigger to the back of the buttpad. The stock shows no notable wear. The stock’s finish is intact. The stock fits tightly to the barreled action, with no play. There are no chips or cracks. Overall, the stock rates in Excellent condition.
Type of Finish: Titanium
Finish Originality: Original
Bore Condition: The bore is bright with sharp rifling. There is no erosion in the bore, but there is some fouling present. In this writer’s opinion, the bore rates 9.5/10
Overall Condition: This rifle retains about 98% of its original metal finish. The balance of the finish shows light handling wear, with light operational marks on the bolt. The sling studs show light corrosion, and the sling stud in the belly of the stock is not centered properly. Otherwise, the carbon fiber wrap, and the finish on the rest of the metal surfaces is intact. The markings are clear and legible. The screw heads are sharp. Overall, this rifle rates in Fine to Excellent condition.
Mechanics: The action functions correctly, as does the safety. The factory installed TriggerTech trigger has a light, crisp, and clean break. We did not fire this rifle, but we did perform a mechanic’s check. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.
Box, Paperwork & Accessories: This rifle comes with the picatinny rail as mentioned above, and a thread protector.
Our Assessment: The Christensen Arms Ridgeline FFT Titanium is an ultralight precision hunting rifle built around the company’s titanium Model 14 action and Flash Forged Technology carbon-fiber stock. The rifle uses a carbon-fiber-wrapped 416R stainless steel barrel, TriggerTech trigger, internal magazine with hinged floorplate, and a Remington 700-pattern optics interface, combining very low weight with the rigidity and accuracy features expected from Christensen Arms’ premium hunting rifles. Chambered in 6.5 PRC with a 1:8″ twist, this example is particularly well suited for mountain hunting and longer range use where flat trajectory, retained energy, and reduced rifle weight are priorities.
This rifle is in Fine to Excellent condition overall, retaining about 98% of its original finish with only light operational marks on the bolt. The FFT carbon-fiber stock remains in Excellent condition with an intact finish, tight fit to the barreled action, and no chips or cracks, though the sling studs show light corrosion and the belly-mounted stud is noticeably off-center. The bore is bright with sharp rifling and some fouling, rating 9.5/10, while the action and safety function correctly and the factory TriggerTech trigger has a light, crisp break. The installed Picatinny rail and included muzzle brake complete an exceptionally lightweight, high-performance hunting configuration. Please see our photos for a better understanding of the condition and good luck with your bids! – J.D.