Colt Single Action Army SAA .45 Colt 7.5″ SA Revolver

SOLD FOR: $1,425.00

LSB#: LSB250712EK002

Make: Colt

Model: Single Action Army

Serial Number: SA05519

Year of Manufacture: 1978-1993

Caliber: .45 Colt

Action Type: Single Action Revolver with Side Loading Gate Cylinder

Markings: The top of the barrel is marked “COLT’S PT.F.A. MFG. CO. HARTFORD CT. U.S.A.”. The left side of the barrel is marked “COLT SINGLE ACTION ARMY .45”. The left side of the frame is marked “PAT. SEPT. 19, 1871 / JULY 2, 72 JAN. 19, 75”. The left side of the grip frame is marked with the serial number “SA05519”. 

Barrel Length: 7.5”

Sights / Optics: The front sight is a blade fixed to the front of the barrel. The rear sight is a square-notch at the rear of a groove in the top strap.

Stock Configuration & Condition: The grips are two-piece synthetic white panels. There are little to no handling marks. There are no chips or cracks. Overall, the grips are in about Excellent condition.

Type of Finish: Nickel

Finish Originality: Original.

Bore Condition: The bore is bright and the rifling is sharp. There is no erosion. In this writer’s opinion the bore rates 9 out of 10.

Overall Condition: This revolver retains about 90% of its original metal finish. The balance of the finish shows moderate handling and storage wear. On the frame there is pealing and oxidization present. On the barrel there is scratching and a couple nicks. There is a turn line on the cylinder. The screws are sharp, and the pins are unmarred. The markings are clear and legible. Overall, this revolver is in Very Good condition. 

Mechanics: The action functions correctly. Lockup produces very little play side-to-side and minor end-shake on all six chambers. The trigger is crisp. We did not fire this revolver, but we did perform a mechanic’s check. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None. 

Our Assessment: The Colt Single Action Army is one of the most iconic revolvers in history, introduced in 1873 and still produced today. The 3rd Generation guns, such as this one, were built starting in 1976 and reflect Colt’s continued commitment to the traditional Peacemaker design. Chambered in .45 Colt with a 7.5” barrel, this revolver represents the classic full-length cavalry configuration, offering excellent sight radius and balance. The nickel finish was a popular option for buyers who wanted both a distinctive appearance and a protective finish against wear and corrosion.

This example, manufactured between 1976 and 1993, remains in Very Good condition, retaining about 90% of its original nickel finish. Peeling and oxidation are present on the frame, with scratches and a few small nicks visible on the barrel. There is a defined turn line on the cylinder, and light thinning across the high points. The bore is bright with sharp rifling, rating 9 out of 10, and the mechanics are solid with a crisp trigger and minimal play at lockup. The synthetic white grips with Colt’s rampart and eagle motifs are intact and clean, rating Excellent. Please look at our photos and good luck with your bid! -N.P