WWII Inland Division General Motors M1 Carbine Semi Auto Rifle 1944 C&R

SOLD FOR: $1,300.00

LSB#: WY242308JH017

Make: Inland Division of General Motors

Model:  M1 Carbine

Serial Number: 6366292

Year of Manufacture: Late 1944, Barrel Date 10-1944.

Caliber: .30 Cal Carbine

Action Type: Semi-Automatic carbine fed by detachable magazines.

Markings:

The top of the receiver is marked, “U.S. CARBINE CAL. 30 M1 / INLAND DIV. 6366292”

The barrel flat has the usual Inland hieroglyphics. The top of the barrel is marked “P” about 4” inches back from the front sight, the end of the barrel is marked “INLAND MFG. DIV. GENERAL MOTORS 10-44”.

The front sight is stamped with “N”-International Business Machine part

The barrel band is unmarked

The rear sight is marked Shield “I.R.C.O. 7160060”-for International Register CO.

The slide is marked with a very faint “7161843   M”, and “PI” on the inside. For Packard Inland.

The Lug is unmarked

The stock is marked in the sling cut with “BR-B” for Milton Bradley CO. these stocks were originally made for IBM. The right flank of the stock has a small ordnance wheel and “480”.

The upper handguard is marked “IO” for Inland Overton.

This rifle also includes an additional upper handguard that is unmarked.

The trigger group is marked “INLAND”

The hammer is marked “H.” for Hemphill Manufacturing Company.

The magazine release is marked “M” and “EI” for Eaton Pond CO

The cross bolt safety is unmarked.

This rifle includes 3 x 15 round magazines marked “U”, “KSC” and one unmarked. It also includes 3 x 30 round magazines marked “J” “M2” and one marked “A.I.” for Autoyre Inland.

Barrel Length: 18″

Sights / Optics: The front sight is a fixed blade set between protective ears.  The rear sight is the later style sliding aperture sight with a knurled windage knob dovetailed to the receiver.

Stock Configuration & Condition: The stock is an Oval cut, high wood stock, with a four rivet handguard, type two barrel band, an early style cross bolt safety and a checkered metal Buttplate. The LOP measures about 13.25” from the front of the trigger to the back of the buttplate. The stock has been sanded and refinished as such it shows very little wear. There are two notable marrs on the right side of the forend. In the sling cut there is a screw poking through from the buttplate. There are no chips or visible cracks. The installed upper handguard is in very much the same condition with a notable repair plug about midway in the sighting groove. There are no chips or cracks. The extra handguard appears to have cracked down the center but then was expertly repaired. It shows minimal wear other than the repair. The metal buttplate has almost all of its finish, has sharp checkering, minor patina and minor surface rust speckles. Overall the furniture is in Very Good + to Excellent condition as refinished for C&R.

Magazine Quantity & Condition: This rifle includes 3 x 15 round magazines and 3 x 30 round magazines 6 magazines total. The magazines range from Very Good to Fair condition overall. The two 15 round blued magazines have surface rust freckling as does one the 30 round magazines. Please see our high quality photos for a better understanding of the magazine conditions.

Type of Finish: Parkerized and Blued.

Finish Originality: Refinished and Original

Bore Condition: The bore is very bright with well defined rifling. According to our gauge the muzzle reads at 15. There is no visible erosion. In this writer’s opinion the bore rates 9/10.

Overall Condition:  This rifle retains about 99% of its metal finish. The bolt and friction surfaces of the receiver show the majority of wear. The barrel shows only minor rub wear from the barrel band. The screw heads are sharp and the markings are clear. Overall, this rifle rates in about Excellent condition as refinished for C&R.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: This rifle includes the Six magazines mentioned above, and the extra handguard.

Our Assessment:  During the early stages of World War II, the U.S. military recognized the need for a lightweight rifle that would bridge the gap between the heavy and cumbersome M1 Garand rifle and the standard issue sidearm, the M1911 pistol. The goal was to provide troops with a compact and easy-to-handle firearm that offered more firepower than a pistol but was lighter and more maneuverable than a full-size rifle. In 1941, the U.S. Army’s Ordnance Department contracted with various manufacturers, including Winchester and General Motors’ Inland Division, to develop and produce the M1 Carbine. The rifle was designed by a team led by firearms designer David Williams, who drew inspiration from the successful M1 Garand and the short-recoil action of the M1 Thompson submachine gun. The M1 Carbine featured a gas-operated, semi-automatic action and fired a .30 caliber cartridge known as the .30 Carbine. The cartridge, while less powerful than the standard .30-06 ammunition used in the M1 Garand, offered greater capacity and reduced recoil, making it more controllable and well-suited for short to medium-range engagements. The M1 Carbine saw widespread use in World War II, becoming a staple firearm for American troops. It was praised for its reliability, ease of use, and versatility. The rifle was not only issued to U.S. forces but also provided to allied nations through various lend-lease programs. After World War II, the M1 Carbine continued to serve in the Korean War and saw limited use in subsequent conflicts. It also became popular among civilian shooters and collectors due to its historical significance and manageable recoil. Overall, the M1 Carbine played a significant role in U.S. military history, offering a lightweight and reliable firearm that filled a niche between pistols and full-size rifles. Its compact design, firepower, and ease of use made it a favored weapon among soldiers in various roles and contributed to its enduring legacy. This example although it has been refinished is in amazing to almost like new condition. To better understand this M1 carbine please see our high quality photos Via the link and best of luck with your bidding!!!-R.L.

WWII Inland Division General Motors M1 Carbine Semi Auto Rifle 1944 C&R
WWII Inland Division General Motors M1 Carbine Semi Auto Rifle 1944 C&R