WWII Inland Division General Motors M1 Carbine Semi Auto 1944-1945 C&R
SOLD FOR: $1,135.00
WOA#: WY240601RN006
Make: Inland Division of General Motors
Model: M1 Carbine
Serial Number: 6767188
Year of Manufacture: Receiver Late 1944 Early 1945, Barrel Date 11-44.
Caliber: .30 Cal Carbine
Action Type: Semi-Automatic carbine fed by detachable magazines.
Markings:
The top of the receiver is marked, “U.S. CARBINE CAL. 30 M1 / INLAND DIV. 6767188”
The magazine release is marked “M”.
The rear sight is marked “HI”-Hemphill MFG. Co. correct for Inland.
The Lug is marked “D.I.”. A Standard Products Part. Correct for Inland.
The stock is marked with a “I IO” in the nose, “IO” in the sling cut for S.E. OVERTON CO. Correct for Inland, and has an Ordnance Wheel stamp on the left side.
The oiler is marked “IS” for International Silver CO. correct for Inland Div.
The trigger group is unmarked.
The left side of the hammer is marked “HI”- for Hemphill MFG. Co. correct for Inland.
The slide is marked “7160091”.- a Winchester Slide.
The Bottom of the barrel has no markings, The barrel flat has many stamps both letters and numbers, The top of the barrel is marked “P” about two inches back from the front sight, the end of the barrel is marked “INLAND MFG. DIV. GENERAL MOTORS 11-44”.
The front sight is stamped with “N”-International Business Machine part
The barrel band is marked “SI” Unknown-Correct for Inland used in S/N above 6,000,000
The upper handguard is stamped “IO” for S.E. OVERTON CO. Correct for Inland.
The magazine is marked “KI” for Keeler Brass Co. correct for inland.
Barrel Length: 18″
Sights / Optics: The front sight is a fixed blade set between protective ears. The rear sight is the later style sliding aperture sight with a serrated windage knob dovetailed to the receiver.
Stock Configuration & Condition: The stock is an Oval cut, low wood stock, with a four rivet handguard, type three barrel band with bayonet lug, a later style flip type safety and a checkered metal Buttplate. The LOP measures about 13.25” from the front of the trigger to the back of the buttplate. The wood stock shows the usual scratches, scuffs and compressions plus several small chips out of the pommel, and a chip out of the sling cut. The metal butt plate has semi-dulled checkering, has lost most of its finish and has begun to turn brown with patina. There is also a small patch of surface rust present. The handguard also has some scratches and compressions. The handguard has one small chip near the receiver. Neither the handguard nor the stock have cracks Overall the wood rates in about Very Good condition.
Magazine Quantity & Condition: This carbine includes one 15 round magazine in Very Good condition.
Type of Finish: Parkerized / Blued
Finish Originality: Original
Bore Condition: The bore is bright with well defined rifling. There is no visible erosion. In this writer’s opinion the bore rates 8.5/10.
Overall Condition: This rifle retains about 90% of its metal finish. The bolt and friction surfaces of the receiver show the majority of wear. The trigger guard shows the most patina although there are some small patches of patina scattered throughout. The screw heads are sharp and the markings are clear. Overall, this rifle rates in about Very Good to Fine condition for C&R.
Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.
Box, Paperwork & Accessories: This carbine includes the magazine and a green canvas sling.
Our Assessment: During the early stages of World War II, the U.S. military recognized the need for a lightweight rifle that would bridge the gap between the heavy and cumbersome M1 Garand rifle and the standard issue sidearm, the M1911 pistol. The goal was to provide troops with a compact and easy-to-handle firearm that offered more firepower than a pistol but was lighter and more maneuverable than a full-size rifle. In 1941, the U.S. Army’s Ordnance Department contracted with various manufacturers, including Winchester and General Motors’ Inland Division, to develop and produce the M1 Carbine. The rifle was designed by a team led by firearms designer David Williams, who drew inspiration from the successful M1 Garand and the short-recoil action of the M1 Thompson submachine gun. The M1 Carbine featured a gas-operated, semi-automatic action and fired a .30 caliber cartridge known as the .30 Carbine. The cartridge, while less powerful than the standard .30-06 ammunition used in the M1 Garand, offered greater capacity and reduced recoil, making it more controllable and well-suited for short to medium-range engagements. The M1 Carbine saw widespread use in World War II, becoming a staple firearm for American troops. It was praised for its reliability, ease of use, and versatility. The rifle was not only issued to U.S. forces but also provided to allied nations through various lend-lease programs. After World War II, the M1 Carbine continued to serve in the Korean War and saw limited use in subsequent conflicts. It also became popular among civilian shooters and collectors due to its historical significance and manageable recoil. Overall, the M1 Carbine played a significant role in U.S. military history, offering a lightweight and reliable firearm that filled a niche between pistols and full-size rifles. Its compact design, firepower, and ease of use made it a favored weapon among soldiers in various roles and contributed to its enduring legacy. This Inland M1 has over 90% correct parts for Inland, which is a rare find. The bore is in great shape and the markings are Very Clear. If you have been looking for an Inland M1 to add to your collection please take a serious look at this one. To better understand this M1 carbine please see our high quality photos and best of luck with your bidding!!!-R.L.
