WWII Inland Division General Motors M1 Carbine .30 Cal Semi Auto 1944 C&R
SOLD FOR: $1,275.00
LSB#: LSB250527MS019
Make: Inland Division of General Motors
Model: M1 Carbine
Serial Number: 6635366 Unique palindrome serial number!
Year of Manufacture: Late 1944, Barrel Date 12-1944.
Caliber: .30 Cal Carbine
Action Type: Semi-Automatic carbine fed by detachable magazines.
Markings:
The top of the receiver is marked, “U.S. CARBINE CAL. 30 M1 / INLAND DIV. 6635366”. The bottom is marked “C”.
The magazine release is marked “M” and “EI” for Eaton Pond Co. correct for Inland
The rear sight is marked Shield “I.R.C.O.”-for International Register CO.
The Lug is unmarked
The stock is marked “IO” for Inland Overton. The bottom of the pommel is marked “54”. The right side of the stock has a large ordnance wheel.
The upper handguard is marked “IO” for Inland Overton.
The trigger group is marked “INLAND”
The hammer is marked “HI” for Hillerich Machine Company.
The cross bolt safety is unmarked
The sear is marked “R.I.” – Inland part.
The slide is marked “7160091 C”.- a Winchester Slide.
The Bottom of the barrel has no markings, The barrel flat has the usual Inland “hieroglyphics”, The top of the barrel is marked “P” about 2.75 inches back from the front sight, the end of the barrel is marked “INLAND MFG. DIV. GENERAL MOTORS 12-44”.
The front sight is stamped with a sideways “N” correct for Inland.
The barrel band is marked with an “AI” for AUTOYRE-INLAND
The oiler is marked “IU”
The magazine is marked “CQ”
Barrel Length: 18″
Sights / Optics: The front sight is a fixed blade set between protective ears. The rear sight is the later style sliding aperture sight with a knurled windage knob dovetailed to the receiver.
Stock Configuration & Condition: The stock is an Oval cut, low wood stock, with a four rivet handguard, type three barrel band with bayonet lug, a crossbolt safety and a checkered metal Buttplate. The LOP measures about 13.25” from the front of the trigger to the back of the buttplate. The upper handguard shows minor handling with no notable marks, chips or cracks. The buttplate shows some minor surface rust, scuffs on the edges and the finish has aged to a green color. The checkering is still mostly sharp. The stock shows normal handling wear with some scuffs, surface level lines and minor compressions scattered throughout. There are some small chips present with one notable one on the left edge of the belly on the butt. There is also a patch of wear on the left side from the sling. Overall the stock is in Good+ to Very Good condition.
Magazine Quantity & Condition: This rifle includes one 15 round magazine. The magazine shows scuffs from use. The spring is mostly strong. Overall the magazine is in Good condition.
Type of Finish: Parkerized / Blued
Finish Originality: Original
Bore Condition: The bore is bright with sharp rifling. There is no visible erosion or pitting. In this writer’s opinion the bore rates 9.5/10.
Overall Condition: The rifle retains 85% of its metal finish. The finish has thinned from age and cleaning. The bolt and action show finish loss on the friction surfaces. The barrel and barrel band show surface rust scattered throughout with a notable patch towards the muzzle on the left side of the barrel. The markings are mostly clear and the screw heads are sharp with a few minor tool marked slots. Overall this rifle is in Good to Good+ condition.
Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.
Box, Paperwork & Accessories: This rifle includes a magazine and a sling.
Our Assessment: During the early stages of World War II, the U.S. military recognized the need for a lightweight rifle that would bridge the gap between the heavy and cumbersome M1 Garand rifle and the standard issue sidearm, the M1911 pistol. The goal was to provide troops with a compact and easy-to-handle firearm that offered more firepower than a pistol but was lighter and more maneuverable than a full-size rifle. In 1941, the U.S. Army’s Ordnance Department contracted with various manufacturers, including Winchester and General Motors’ Inland Division, to develop and produce the M1 Carbine. The rifle was designed by a team led by firearms designer David Williams, who drew inspiration from the successful M1 Garand and the short-recoil action of the M1 Thompson submachine gun. The M1 Carbine featured a gas-operated, semi-automatic action and fired a .30 caliber cartridge known as the .30 Carbine. The cartridge, while less powerful than the standard .30-06 ammunition used in the M1 Garand, offered greater capacity and reduced recoil, making it more controllable and well-suited for short to medium-range engagements. The M1 Carbine saw widespread use in World War II, becoming a staple firearm for American troops. It was praised for its reliability, ease of use, and versatility. The rifle was not only issued to U.S. forces but also provided to allied nations through various lend-lease programs. After World War II, the M1 Carbine continued to serve in the Korean War and saw limited use in subsequent conflicts. It also became popular among civilian shooters and collectors due to its historical significance and manageable recoil. Overall, the M1 Carbine played a significant role in U.S. military history, offering a lightweight and reliable firearm that filled a niche between pistols and full-size rifles. Its compact design, firepower, and ease of use made it a favored weapon among soldiers in various roles and contributed to its enduring legacy. To better understand this M1 carbine please see our high quality photos via the link and best of luck with your bidding!!!-R.L.
