Standard Products M-1 Carbine U.S. .30CAL 18” Semi Auto Rifle 1944 C&R
SOLD FOR: $1,301.00
LSB#: WY240723KM006
Make: Standard Products
Model: M1 Carbine
Serial Number: 2221190
Year of Manufacture: April 1943-May 1944. Most likely early 1944. Barrel date- 2-44
Caliber: .30 Carbine
Action Type: Semi Automatic firearm fed by Detachable Magazines.
Markings:
The bottom front of the barrel has an Arlington Arms import mark.
The top of the receiver: “U.S. CARBINE / CAL. .30 M1” on the front and “STD. PRO. / 2221190” on the rear. The left side of the receiver is marked “2O” below the wood line.
The top of the barrel is marked “UNDERWOOD / 2-44” with the flaming bomb and a “P” about 3.5 inches back from the front sight.
The front sight is marked “PO B” an IBM made part.
The barrel band is unmarked.
The rear sight is unmarked.
The bottom of the slide is marked “U P”
The trigger housing is marked “BE-B” an IBM part.
The safety is unmarked.
The magazine catch is marked “M” and “E.I.” an Inland Division part.
The hammer is marked “BR” a Rock-Ola part.
The sear is marked “RI”- Inland Division.
The lug is marked “STANDARD PRODUCTS”
The sling well is marked “S-HB” for Hillerich and Bradsby aka Louisville Slugger. Correct for Standard Products. The right flank has a faint Ordnance Wheel. The bottom of the pommel is marked “119” and the front of the grip has a “P” acceptance mark.
The upper handguard is stamped “H.I.” for Hillerich & Bradsby, makers of the Louisville Slugger baseball bats. Produced for Inland Division.
The magazine is marked “SL” M.S. Little Co. for Standard Products.
The oiler is marked “IS” for International Silver CO.
Barrel Length: Approximately 18 Inches
Sights / Optics: The front sight is a fixed blade with protective ears. The rear sight is the early L type dual aperture “flip sight” dovetailed to the receiver.
Stock Configuration & Condition: The stock on this rifle is an oval cut, low wood stock with a two rivet handguard, a type one barrel band, and a cross bolt safety. The LOP is 13.25” from the front of the trigger to the rear of the buttplate. The stock has been lightly sanded and refinished. The stock as a result shows minimal lines, compressions and scratches. There are a series of chips in the leading edge of the pommel. The nose shows dents but no chips. There are no visible cracks in the stock. The stock does show a series of repair plugs on the right side near the magazine well and one more farther forward. The metal buttplate has lost its finish, has semi sharp checkering and shows surface scratches and patina. The upper handguard shows similar wear to the stock with a small chip out of the left side sighting groove edge and left rivet hole. Overall the wood is in about Very Good condition for refinished as C&R considering the age.
Type of Finish: Parkerized
Finish Originality: Original and refinished.
Bore Condition: The bore is very bright with defined rifling. There are some faint lines from use but no visible erosion. In this writer’s opinion the bore rates 8.5/10.
Overall Condition: This rifle retains about 95% of its finish. The trigger group, Bolt, and Receiver all show surprisingly little wear. The slide and barrel have begun to patina. There is some minor finish loss on the front sight. The marking on the barrel is a little faded but is still visible. Overall the rifle is in about Very Good to Excellent condition for C&R.
Mechanics: The action functions correctly. We have not fired this rifle. As with all previously owned firearms, a thorough cleaning may be necessary to meet your maintenance standards.
Box, Paperwork & Accessories: This rifle includes one 15 round Magazine and a Green canvas sling. The magazine shows some rust pitting in the finish but it has a good spring and unbent feed lips. Overall the magazine is in Good condition.
Our Assessment: This Standard Products M1 Carbine, manufactured in 1944, is a classic World War II-era rifle known for its lightweight design and reliable performance. Standard Products, originally a manufacturer of automotive parts, was one of the smaller contractors for M1 Carbines, producing around 247,000 units. This example, being a mix of components from various wartime manufacturers, reflects the collaboration of several companies to meet the high production demands of the war.
The Underwood barrel on this carbine is a testament to the quality of parts shared among manufacturers. Underwood, known for its typewriters, produced a large number of barrels for other contractors, and its barrels are highly regarded for their durability and accuracy. The inclusion of a Hillerich and Bradsby stock, made by the famed Louisville Slugger company, adds another layer of historical significance, as they were one of the many companies that helped supply wood stocks during the war.
The IBM trigger group in this carbine further enriches its history. IBM, typically known for its business machines, was another key player in M1 Carbine production, providing various parts, including trigger groups. The combination of these components including a Standard Products receiver, Underwood barrel, Hillerich and Bradsby stock, and IBM trigger group—makes this M1 Carbine a fascinating artifact of American industrial collaboration during WWII, blending the efforts of diverse manufacturers into a functional and historically significant firearm. To better understand this M1 carbine please see our high quality photos Via the link and best of luck with your bidding!!!-R.L.
