Remington Model 105 CTi II 2 12 GA 28″ Carbon Fiber Bottom Ejecting Shotgun

SOLD FOR: $1176

LSB#: 210324DL87

Make: Remington

Model: 105CTi II

Serial Number: CT008710

Year of Manufacture: 2009 (KD Date Code)

Gauge: 12 GA 2 ¾” or 3” Shells

Action Type: Bottom Ejecting Semi Auto Shotgun

Markings: The left side of the barrel is marked “105 CTi II ONLY * 12 GA 2 ¾” OR 3”” and “KD”. The left side of the receiver is marked “105 / CTi / II”, “Remington” and “CT008710”. The right side of the receiver is marked “105 / CTi / II” and “Remington”. The right side of the barrel is marked “REMINGTON ARMS CO. ILION, NY” and has proof and test marks. The back of the bolt handle is marked “R”. The top of the wrist is marked “R” and the grip cap is also marked “R”.

Barrel Length: 28” Vent Rib

Choke: The currently installed choke measures Improved Cylinder

Sights / Optics: This shotgun is mounted with a white bead at the muzzle of the full length ventilated rib. There is a bright metal alignment bead at the midsection.

Stock Configuration & Condition: The stocks are two piece checkered walnut with a capped pistol grip, finger groove forend, straight comb, and a black rubber buttpad. The checkering is mostly sharp with a few little nicks. There are a few light compressions and faint scuffs on the belly. There are no chips or cracks present. The LOP measures approximately 14 1/4” from the front of the trigger to the back of the buttpad. The buttpad has melted and rates in about Very Good condition. The stocks rate in about Fine Plus overall condition.

Type of Finish: Blued Barrel with TriNyte & Carbon Fiber Receiver

Finish Originality: Original

Bore Condition: The bore is bright. There is no erosion in the bore.

Overall Condition: This shotgun retains about 99% of its metal finish. There are one or two little marks on the barrel. There are a couple little marks on the top of the receiver at the rear, hardly noticeable. There are light handling marks and operational wear. The markings are clear. The pinheads are unmarred. Overall, this shotgun rates in about Fine condition only because of the wear to the buttpad, once its replaced it will be an easy Excellent.

Mechanics: The action functions correctly. This shotgun has a rotary bolt lockup and a target grade roller sear trigger. We have not fired this shotgun. As with all previously owned firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None

Our Assessment: Remington’s first bottom ejecting shotgun was the Pre-Model 10 which was released in 1908 dubbed the Model 1908 for a couple years before becoming the Model 10. It featured a takedown design, wood stocks, pump action, and a classic blued finish. Almost 100 years later Remington would release another bottom ejecting shotgun, the CTi 105. The shotgun was a far cry from its predecessor and had a part carbon fiber receiver, rotary bolt, recoil reducer in the buttstock and target roller trigger paired with walnut stocks and a blued barrel. This is the later 105 CTi II which made some engineering improvements to the first model. This one has some light wer and looks like it saw little use except for the buttpad. This will be a great shotgun to take to the skeet range and is eaqually friendly for left or right handed shooters. Please see our photos and good luck!