Harrington & Richardson Arms H&R M1 Garand .30-06 Semi-Auto Rifle 1955 C&R
SOLD FOR: $1,350.00
LSB#: LSB251211TN032
Make: Harrington & Richardson (H&R) Arms Company
Model: M1 Garand
Serial Number: 5666588
Year of Manufacture: Receiver circa 1955, Barrel Date 7-55.
Caliber: .30-06 Springfield
Action Type: Semi Auto, En Bloc Clip Fed
Markings:
Receiver: “U.S. RIFLE / CAL. .30 M1 / H. & R. ARMS CO. / 5666588”
Trigger Group: “6528290-HRA N”
Hammer: “HRA 5546008”
Safety: “SA-11”
Follower: Unmarked
Receiver Leg: “A 6528291”.
Op Rod: “D35382 SA”
Bolt: “6528287 HRA -U-” HRA Bolt made by Underwood.
Barrel: “A HRA 6535448 7-55 RS62 P M” with a DOD Eagle cartouche.
The front of the gas plug is marked “PO”.
The cylinder lock is unmarked
The right side of the rear sight adjustment knob is marked “WRIGHT” with “LEFT” in two places with two counter clockwise arrows.
The elevation Knob is marked from 2-12 in increments of two and “NHC”.
The stock is marked with a DOD cartouche,”18″ and a “P” acceptance stamp.
Barrel Length: 24″
Sights / Optics: The front sight is a blade set between two protective wings. The rear sight is a fully adjustable aperture sight.
Stock Configuration & Condition: The hardwood stock has a semi-pistol grip, metal nose cap, two sling loops, stacking loop, and a metal buttplate with hinged metal door for storage in the buttstock. The LOP measures 13 inches from the front of the trigger to the back of the butt plate. The stock shows sanding, discoloration, a notable impact mark on the left side about 2.5″ back from the nose, another notable impact mark on the left side of the comb, scattered compressions, nicks and surface level lines. The rear upper handguard has cracked and been repaired showing compressions and marks throughout as well. The front handguard shows compressions and has been scratched with “CK”. The stacking ring is partially crushed. There are some small chips missing from some of the edges. The butt plate retains most of its finish and checkering showing some minor surface rust freckling. The door spring is strong. Overall the stock set is in about Fair+-Good condition.
Type of Finish: Parkerized
Finish Originality: Original.
Bore Condition: The bore is Very bright and the rifling is well defined. There is no visible erosion/pitting in the grooves of the bore. Our gauges show a muzzle reading of 2 and a throat erosion of about 2.5+. In this writer’s opinion the bore rates 8.75/10.
Overall Condition: This rifle retains about 88% of its finish. The gas cylinder and lock have lost their finish. The friction surfaces of the receiver and bolt show very minor rub wear. The edges of the receiver and trigger group show finish thinning. The action is smooth. The markings are clear and the screw heads are sharp. Overall this rifle is in about Good condition.
Mechanics: The action functions correctly. We have not fired this rifle. As with all previously owned firearms, a thorough cleaning may be necessary to meet your maintenance standards.
Box, Paperwork & Accessories: This rifle includes a manual, cleaning tool, and CMP certificate of authenticity.
Our Assessment: Harrington & Richardson M1 Garands were produced in the mid-1950s as part of renewed contracts to keep the rifle in service during the Cold War era. This example features a receiver dating to 1955 and a barrel marked 7-55, reflecting its postwar manufacture. It is fitted with a rarely encountered HRA-marked bolt that was originally made by Underwood, a detail that highlights the extensive use of subcontractors and parts interchangeability in the Garand program. The mix of these components places the rifle firmly within the later production period when H&R was supporting the continued need for M1 rifles.
The M1 Garand itself is one of the most iconic U.S. service rifles, adopted in 1936 and fielded extensively during World War II and Korea. Its semi-automatic design gave American forces a clear advantage over opponents armed with bolt-action rifles, leading General George S. Patton to declare it “the greatest battle implement ever devised.” Harrington & Richardson, a company with roots going back to the 19th century, was among the firms contracted to produce Garands in the 1950s, ensuring sufficient supply and long-term support of the platform. This rifle, with its Cold War era production and distinctive Underwood-sourced bolt, represents both the industrial collaboration and enduring legacy of the M1 Garand. To better understand this M1 please see our high quality photos via the link and best of luck with your bidding!!!-R.L.