Colt 2nd Generation Single Action Army SAA .45 Revolver, MFD 1970 C&R

SOLD FOR: $2044.97

LSB#: 210504JN07

Make: Colt

Model: Single Action Army, 2nd Generation

Serial Number: 58027SA

Year of Manufacture: 1970 (https://www.colt.com/serial-lookup)

Caliber: .45 Colt

Action Type: Single Action Revolver with Side Loading Gate Cylinder

Markings: The top of the barrel is marked “COLT’S PT. F.A. MFG. Co. HARTFORD CT. U.S.A.”, the left is marked “COLT SINGLE ACTION ARMY .45”. The left of the frame is marked “PAT. SEPT 19. 1871 / JULY 2, 72 JAN. 19, 75” and with a rampant colt logo. The left of the trigger guard is marked “VP” in triangle at the front and “V” at the rear, the right of the trigger guard is marked “A”. The bottom of the frame and the left of each portion of the trigger guard are each marked “58027SA”. The rear face of the cylinder is marked with a rampant colt logo, the front face of the cylinder is marked “027”. The rear face of the frame (under the right grip panel) and the rear face of the loading gate are each marked with assembly number “297”.

Barrel Length: 7 1/2”

Sights / Optics: The front sight is a quarter-round blade fixed to the front of the barrel. The rear sight is a square notch at the rear of a groove in the top strap.

Stock Configuration & Condition: The grips are two-piece smooth faux-pearl panels with wood backings. The grips have no notable wear or damage, only light handling marks. There are no chips or cracks. Overall, the grips are in about Excellent condition as not original to the gun.

Type of Finish: Blue & Case Color

Finish Originality: Original

Bore Condition: The bore is bright and the rifling is sharp. There is no erosion in the bore.

Overall Condition: This revolver retains about 98% of its metal finish. There is a scratch on the left of the trigger guard above the trigger and a couple of very minor scratches between two of the flutes on the trigger. Otherwise, there are only light handling marks. The screw heads are sharp. The markings are clear. Overall, this revolver is in about Excellent condition.

Mechanics: The action functions correctly. Lockup produces almost no play on all six chambers. The trigger is crisp. The cylinder’s bushing is separate from the cylinder. We did not fire this revolver. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: This revolver comes in a Colt Custom Shop presentation case with orange fabric-lined interior. The case has scattered storage wear on the exterior with light wear on the interior from the contents, in Good-Very Good condition as not original to the gun.

Our Assessment: The Colt Single Action Army is perhaps the quintessential old west handgun, produced for more than a century, serving the U.S. Army as its sidearm from 1873 into the first world war and captivating audiences on the silver screen. The SAA was discontinued by Colt as it tooled up to provide for the WWII war effort, and it was thought by Colt that the design was obsolete, swing-out cylinder revolvers had been around for half a century and autoloaders were gaining in popularity. Then, with the advent of television and western programs such as Hopalong Cassidy, The Lone Ranger, The Cisco Kid, and The Gene Autry Show, American interest in the guns that won the west was reborn. In 1956, Colt reintroduced the Single Action Army, this new production run now referred to as the 2nd Generation SAA’s. This example was produced in 1970 and has blue & case color finish, a 7 1/2″ barrel and is chambered in the original .45 Colt cartridge. It comes in a nice Colt presentation case and is in Excellent condition, appearing to have seen little, if any use. This would make a fantastic addition to any collection. Please see our photos and good luck!

Colt 2nd Generation Single Action Army SAA .45 Revolver, MFD 1970 C&R
Colt 2nd Generation Single Action Army SAA .45 Revolver, MFD 1970 C&R