CMP WWII Inland Division SG Receiver M1 Carbine .30 Cal 18” Rifle MFD 1943
SOLD FOR: $1,375.00
LSB#: WY240914RR008
Make: Inland Division of General Motors with a Saginaw Gear Manufactured Receiver.
Model: M1 Carbine
Serial Number: 847078
Year of Manufacture: Receiver 1943, Barrel Date 9-43
Caliber: .30 Cal Carbine
Action Type: Semi-Automatic carbine fed by detachable magazines.
Markings:
The top of the receiver is marked, “U.S. CARBINE CAL. 30 M1 / INLAND DIV. 847078”. The left side of the receiver below the wood line is marked “SG” in large font.
The Bottom of the barrel has no markings, The top of the barrel is marked “P” about 5 inches back from the front sight and another in front of the gas block, the end of the barrel is marked “INLAND MFG. DIV. GENERAL MOTORS 9-43”. The barrel flat bears the usual Inland Division hieroglyphics.
The front sight is stamped with “Z”-Quality Hardware
The barrel band is marked “JM” a post war rebuild part.
The slide is marked “7160091 Y” and “PI” on the inside. For Packard Inland.
The rear sight is marked “I.R.C.O. 7160060”-for International Register CO.
The trigger group is marked “S’G’” for Saginaw Gear.
The magazine release is marked “M” and “W.I.”. for Wadsworth Watch Case CO.
The left side of the hammer is marked with an illegible stamp.
The Rotary safety is marked “CM” a post war rebuild part.
The sear is marked “SG-B” an International Business Machine part
The upper handguard is unmarked
The stock is marked in the sling cut “IO” for Inland Overton. The front of the grip is stamped with an “I” and a “P”. The right rear flank of the stock is stamped “847078”.
Barrel Length: 18″
Sights / Optics: The front sight is a fixed blade with protective ears. The rear sight is a sliding adjustable aperture sight dovetailed to the receiver.
Stock Configuration & Condition: The stock on this rifle is an oval cut, low wood stock with a four rivet handguard, a type three barrel band with bayonet lug, and a later style rotary safety. The LOP is 13.25” from the front of the trigger to the rear of the buttplate. The stock appears to have been lightly sanded and refinished. The stock shows very few scattered lines, compressions, rub marks and scratches. There are no visible cracks in the stock. There are a few small chips out of the leading edge of the pommel. The metal buttplate has lost its finish around the edges, has semi sharp checkering but has retained most of its finish in the center. The upper handguard shows similar wear to the stock with two notable compressions one on the right and one on the left. There are no chips or cracks. Overall the wood is in about Very Good condition for refinished as C&R considering the age of the rifle.
Magazine Quantity & Condition: None
Type of Finish: Parkerized and Blued.
Finish Originality: Original
Bore Condition: The bore is bright, with well defined rifling and no visible erosion. According to our gauge the muzzle reads at 1.5. In this writer’s opinion the bore rates 9/10.
Overall Condition: This rifle retains about 98% of the original finish. There is some wear from use on the friction surfaces of the action. The bolt has some finish loss on the friction surfaces. There are several surface level fine scratches on the barrel. There is some finish loss on the muzzle. The finish has begun to turn green with age. Overall this rifle is in Very Good to Excellent condition considering its age for C&R.
Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.
Box, Paperwork & Accessories: This rifle includes a Yellow CMP chamber flag, Certificate of authenticity, safety manual, technical manual, M1 info card, and the original shipping check list from 2007.
Our Assessment: The Inland Division M1 Carbine is a widely recognized variant of the U.S. military’s lightweight, semi-automatic carbine developed during World War II. Manufactured in 1943, this example reflects the diverse and efficient wartime production practices that combined parts from various subcontractors to meet the high demand for these firearms. Inland Division of General Motors, one of the largest producers of M1 Carbines during the war, manufactured this carbine’s barrel, while the receiver, stamped with the Saginaw Gear mark, illustrates the collaborative efforts within the General Motors family of companies. The Packard Inland slide, Wadsworth Watch Case magazine release, and Inland Overton stock further attest to the carbine’s rich history as a product of the war’s industrial ingenuity.
The Inland Overton stock, known for its high-quality walnut construction, showcases the Inland Division’s commitment to durability and functionality. Its ergonomic design provided soldiers with a lightweight yet sturdy firearm, well-suited for fast-paced operations. The Wadsworth Watch Case magazine release, an unusual but notable subcontracted part, highlights the diverse sourcing of components from companies typically outside the firearms industry. This eclectic mix of parts underscores the versatility of the U.S. war economy and the ability to mobilize manufacturers from various sectors to produce critical military equipment.
Sold by the Civilian Marksmanship Program (CMP) in 2007, this carbine has a unique provenance tied to its post-service life. The CMP is known for its role in preserving and distributing surplus military firearms to collectors and enthusiasts. This Inland M1 Carbine is not only a functional firearm but also a historical artifact, representing the ingenuity of wartime production and the ongoing legacy of preserving American military heritage. Please see our high quality photos via the link and best of luck with your bidding!!!-R.L.
