WW2 Winchester M1 Garand M1-D Sniper .30-06 Semi Auto Rifle 1942 C&R
SOLD FOR: $3,895.00
LSB#: LSB250602RN008
Make: Winchester
Model: M1 Garand M1-D Sniper
Serial Number: 144359
Year of Manufacture: Receiver Feb 1942, Barrel Date 1-1952.
Caliber: .30-06 Springfield
Action Type: Semi Automatic rifle, En Block Clip Fed
Markings:
Receiver: “U.S. RIFLE / CAL. .30 M1 / WINCHESTER TRADEMARK 144359”.
Trigger Group: “D28290-14-SA”.
Hammer: “C46008-1 W.R.A.”
Safety: Unmarked
Follower: “11”
Receiver Leg: “D28291-2 W.R.A.”, and on the bottom “4” and “P”.
Op Rod: “D35382 9 SA”
Bolt: “D28287-1 W.R.A.”
Barrel: “S-A-1-52”. The top of the barrel under the handguard is marked “D7312555 M1-D A163”. This marking is somewhat inconsistent with other barrel markings we have seen. This writer has never seen an M1-D barrel marked “M1-D” after the drawing number. The other markings and dates are correct for an M1D.
The Gas tube: “D-35449-SA”.
The gas plug: “PO”
Stock: The grip is marked with a circle “P” acceptance stamp. The bottom of the pommel is marked “7”. The right flank of the butt is stamped “1013”. There is a small “X1” carved in the stock on the left side of the trigger housing cut.
The Leather cheek piece is marked “MRT 2-52”
Barrel Length: Approximately 24” Inches.
Sights / Optics: The front sight is a blade set between two protective wings. The rear sight is a fully adjustable aperture sight set between protective wings. The windage knob is marked “LEFT arrow” twice and “DRC”. The elevation knob is marked “2-12”.
The M84 scope is marked “TELESCOPE / M84 / SERIAL NO 7529”. The covered turrets are marked 0-9 for elevation and L/R 0-20 in increments of 5 for windage. The scope uses a tapered post vertical reticle. The sight picture is very clear. The knobs turn with positive clicks and the sunshade is still functional. The rubber on the eye piece is still semi-pliable. The scope shows some marks and lines on the exterior with finish loss, surface discoloration, and oxidation forming. Overall the scope is in Good+ to Very Good condition.
Stock Configuration & Condition: The stock has a semi-pistol grip, metal nose caps, two sling loops, stacking loop and a metal buttplate with a hinged door for storage. The LOP measures 13 inches from the front of the trigger to the back of the buttplate. The stock also has the leather cheekpiece that positions the shooter’s head for the offset scope. The wood shows scattered lines, nicks and compressions throughout. There are no visible chips or cracks. The top of the comb appears to have had a hole drilled into it. The metal buttplate has been refinished. The door spring is strong. Overall the furniture on this rifle is in about Very Good condition.
Type of Finish: Parkerized
Finish Originality: Refinished
Bore Condition: The bore is bright and clean with sharp rifling and no visible pitting. Our gauges show a muzzle of 1.5 and a throat erosion of 3. In this writer’s opinion the bore rates 9.25/10.
Overall Condition: This rifle retains about 98% of its metal finish. The gas cylinder, lock and plug show the majority of the loss. The bolt shows minor rub wear on the friction surfaces. The barrel is very clean on the exterior. The markings are clean and the screw heads are sharp. Overall the rifle is in Very Good to Very Good+ condition.
Mechanics: The action functions correctly. We have not fired this rifle. As with all previously owned firearms, a thorough cleaning may be necessary to meet your maintenance standards.
Box, Paperwork & Accessories: This rifle includes the flash cone, sling, and the leather cheekpiece.
Our Assessment: This M1D Garand sniper rifle features a Winchester receiver manufactured in February 1942 paired with a Springfield Armory barrel dated January 1952. Under the handguard, the barrel is marked “D7312555 M1-D A163,” a somewhat unusual marking style as M1D barrels typically do not have “M1-D” marked after the drawing number. While the date and other identifiers are correct for M1D production, the marking variation suggests either a less common production batch or a replacement component. The rifle’s M1D configuration was developed during the Korean War era, utilizing a offset scope-mounting system designed for sniping without significantly altering the standard Garand’s battlefield handling.
The M1D originated as an official U.S. military sniper variant of the M1 Garand, replacing the earlier M1C due to its simpler mounting system and reduced production complexity. The M1 Garand itself, designed by John Garand and adopted in 1936, became the primary U.S. service rifle of WWII and the Korean War, praised for its semi-automatic fire and rugged reliability. M1Ds were built primarily from existing rifles, often WWII receivers, rebuilt with new barrels, scopes, and mounts in the early 1950s. This example’s combination of an early Winchester receiver and later Springfield barrel reflects the arsenal rebuild practice, offering a rare and historically layered piece linking early WWII production with the specialized sniper upgrades of the postwar era. Please see our high quality photos via the link and best of luck with your bidding!!! – R.L.
