G.A. Precision Custom Eric Reid Remington Model 700 .308 Win Sniper Rifle

SOLD FOR: $5977.12

LSB#: 230915JK010

Remington, built by Eric Reid of G.A. Precision


Serial Number: G6348356

Year of Manufacture: 2010s-2020s

.308 Win.

Action Type: Bolt Action Rifle with Detachable Magazine

Barrel Length: 
22” Bartlein, 1:11.25″ Twist MTU Heavy Contour

Sights / Optics: There is no provision for iron sights. The top of the receiver is installed with a rail and a pair of rings holding a Schmidt & Bender PM II  4-16×50 CCW scope. The scope has a Gen 2 XR mil reticle and the glass is clear. The reticle illuminates properly. The scope rates in Excellent condition.

Stock Configuration & Condition: The chassis is an Accuracy International AX AICS pale brown chassis with a folding stock, adjustable LOP, adjustable comb, adjustable thumbhook, KeySlot forend, QD sling points, accessory rails, and a pistol grip. An RRS rail is installed. There are light handling marks. The LOP measures approximately 13 1/8” from the front of the trigger to the back of the rubber buttpad. The pad has light handling wear. The stock rates in about Excellent overall condition.

Type of Finish: 
Flat Dark Earth

Finish Originality: Original to G.A. Precision Custom Build

Bore Condition: The bore is bright and the rifling is strong. There is no erosion in the bore. In my opinionthis bore rates 10 out of 10.

Overall Condition: 
This rifle retains about 97% of its metal finish. There are little marks through the finish on the right rear of the receiver from ejected brass. There is wear on the bolt handle and bolt. There are light handling marks. The markings are clear. The screw sockets are strong. Overall, this rifle rates in Excellent condition.

The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: 
Included is the previously described scope, Vortex bubble level, Short Action Precision dual cartridge holder, Atlas bipod, RRS bipod clamp, two additional sections of rail for the forend, thread protector, American Defense clamp, four 10 round Accuracy International magazines, and one 5 round Accuracy International magazine.

Our Assessment: The Remington 700 needs no introduction, it has been one of the most popular bolt action rifles in America for decades, seeing use in target shooting, hunting, and in law enforcement. Remington had been producing sporting rifles for decades, but their Post-WWI Model 30 Sporter took too much time and money to make, plus it required too much milling. After WWII they designed the Model 721 which used a receiver made of bar stock, meaning it could be turned on a lathe, cutting production time and cost. The basic design of the 721 went through further developments under the direction of engineer Mike Walker, and Remington went on to produce the Model 722 and Model 725, and finally, in 1962, the Model 700 was born. With the design, Walker desired to increase accuracy over previous designs so tight bore & chamber tolerances, a short leade, and fast lock time were used. Since its inception in 1962, it has been produced in just about any caliber and configuration you could think of. If it hasn’t there are custom parts and gunsmiths out there to get it exactly how you like. The 700 has been used by police and militaries alike, and this custom build by G.A. Precision has clear influence from the United States Mk13 Mod 7 Sniper weapons system.

The rifle is custom built by GA Precision, who started with a Remington Model 700 receiver which got trued and blueprinted. Then a Bartlein 22 inch MTU heavy contour barrel is installed with 5/8×24 threads to install your favorite accessories; it is currently installed with a custom four port muzzle brake. The barreled action sits in an Accuracy International AX chassis, the best in the business. The previous owner really went all out, aside from sending to G.A. and having Accuracy International parts installed, he also installed an Atlas bipod and topped the rail with a premium Schmidt & Bender scope. The trigger is a match grade trigger that provides a nice pull every time.

When you get a G.A. Precision, you are truly getting the best. G.A. Precision was founded by George Gardner as a means of building competition rifles for local highpower and long range shooters. G.A Precision knows how to build a rifle, they currently build rifles for a multitude of police agencies, to include: FBI SWAT, FBI HRT Team Quantico, ATF SRT, Chicago P.D. SWAT and many more. We have been informed that this one was built by Eric Reid and was originally a law enforcement sniper. Mr. Reid knows a thing about precision, in fact so much that he went on to be an armorer at PWS Marine Sniper School in Quantico. All of these features combined with G.A. Precisions expertise make for an impressive rifle that promises to be a tack driver. This rifle comes with a staggering FIVE magazines to get you started and has hardly any wear, all you need to do is get ammo and zero it. This is a jaw dropping rifle you don’t want to miss out on, drop a bid today. Please see our photos and good luck!

Some are hot, some are not, but thankfully most can be shot!

G.A. Precision Custom Eric Reid Remington Model 700 .308 Win Sniper Rifle
G.A. Precision Custom Eric Reid Remington Model 700 .308 Win Sniper Rifle