WWII U.S. Colt Model 1911A1 .45 ACP Semi-Automatic Pistol, 1943 C&R
SOLD FOR: $3526
Serial Number: 1101576
Year of Manufacture: 1943 (https://www.colt.com/serial-lookup)
Caliber: .45 ACP
Action Type: Single Action Semi-Auto with Removable Magazine
Markings: The left side of the slide is marked “PATENTED APR.20,1897. SEPT.9,1902 / DEC.19,1905. FEB.14,1911. AUG.19,1913”, rampant colt, and “COLT’S PT. F.A. MFG. CO. / HARTFORD, CT. U.S.A.”, the top of the slide is marked “P”. The left of the frame below the magazine release is marked with a “P” acceptance proof, the left side of the frame above the magazine release is marked with “G.H.D”. The right side of the frame is marked “UNITED STATES PROPERTY / No 1101576” and “M1911 A1 U.S. ARMY”, it is also marked with the Springfield crossed cannons behind the grip but it is faint as is common. The rear face of the slide, under the firing pin plate, is marked “1101 / 576”. The left of the trigger guard is marked “VP” in triangle and “P”, the right is marked “60”. The top of the frame is marked “G”, and with a smaller “G” at the disconnector. The left link-lug of the barrel is marked “P” and the left of the barrel is marked “COLT 45 AUTO” above the lug, the bottom of the barrel is marked “F” in front of the lugs.
Barrel Length: 5”
Sights / Optics: The front sight is a short, serrated ramped blade fixed to the slide. The rear sight is a square notch dovetailed into the slide.
Stock Configuration & Condition: The grips are two-piece checkered brown “Coltwood” plastic with large reinforcement rings around the grip screws and reinforcement ribs on the interior. The grips have only a few scattered minor marks. The checkering is well defined. There are no chips or cracks. Overall, the grips are in Fine-Excellent condition.
Type of Finish: Parkerized
Finish Originality: Original
Bore Condition: The grooves are gray, the lands are semi-bright. The rifling is sharp. There is light erosion scattered through the bore, mostly in the grooves. In this writer’s opinion, this bore rates a 7 out of 10.
Many military and C&R eligible weapons have bores that will show erosion. This is not only due to age but to the fact that corrosive primers were commonly used in ammunition worldwide. For example, the U.S. used corrosive ammunition throughout WWII. The U.S. military did not begin to phase out corrosive-primed ammunition until the 1950’s.
Overall Condition: This pistol retains about 96% of its metal finish. The finish is generally strong throughout. There are a few light marks on the chin of the slide and dust cover. There is a light “idiot mark” under the slide stop on the left of the frame. There are only a few other scattered minor marks and light operational wear. The screw heads range from sharp to lightly tool marked with strong slots. The markings are clear. Overall, this pistol is in Fine condition.
Mechanics: The action functions correctly. The trigger pull is crisp. There is minor play between the slide and frame. This pistol has manual and grip safeties. We have not fired this pistol. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.
Box, Paperwork & Accessories: This pistol comes with a single 7-round magazine, marked “L” on the floorplate. The magazine has scattered minor surface oxidation, light operational wear, intact feed lips and a strong spring.
Our Assessment: The 1911 and 1911-A1 pistols served the military of the United States from 1911 to 1985, through two World Wars and the Korean and Vietnam wars. They gained a reputation as a reliable handgun with plenty of stopping power, and are held in high regard by those who have used them. The design was the end-result of a series of developments by famous gun designer John Browning, starting with the Model 1900. The advances made by Browning were revolutionary at the time, and were so successful that they are considered commonplace today. Browning not only developed first a pivoting and then a tilting barrel to allow for a locked system, he developed the concept of “the slide”, which is now synonymous with semi-automatic handguns.
This example was produced by Colt in 1943 as the design saw some tweaks and changes. This pistol was made after the switch to parkerized finishing and retains about 96% of its finish. It has the later-style ramped front sight which replaced the earlier rounded blade and a square notch rear sight which replaced the “U”-notches. The hammer has the original wide-spur which would soon be replaced by a spur of the same width as the body. The slide stop, thumb safety and mainspring housing are all checkered, each of which would eventually be serrated. The grips are the third type of Colt plastic grips with large reinforcement rings and reinforcement ribs on the interior. In all, this is a great example of a 1943 production Colt M1911A1. It was produced when the slides were still serialized, so it’s nice for the collectors to know that the slide is original to the frame. The pistol is in Fine condition, retaining about 96% of its metal finish, a decent bore and strong mechanics. It will make a nice addition to a Colt or WWII small arms collection. Please see our photos and good luck!
Please forgive any typos, I was educated in California -Bud