Colt 3rd Gen Single Action Army SAA Nickel P1756 .44 Special Revolver, 1980
Sold for $2963.00
Model: Single Action Army, 3rd Generation
Serial Number: SA31089
Year of Manufacture: 1980
Caliber: .44 Special
Action Type: Single Action Revolver with Side Loading Gate Cylinder
Markings: The left side of the barrel is marked “COLT SINGLE ACTION ARMY .44 SPECIAL”. The top of the barrel is marked “COLT’S PT. F. A. MFG. Co. HARTFORD, CT. U.S.A.”. The left side of the frame is marked “PAT. SEPT. 19, 1871 / JULY 2,72 JAN.19,75” and with the “Rampant Colt” logo. The underside of the frame at the grip frame is marked “SA31089”. The front and back strap are both marked “SA31089” on the left side. The inside of each grip panel has “31089” hand-written. The left front of the trigger guard is marked with a “VP” in a triangle and at the rear with a “K”, there is a “Z” marked on the right of the trigger guard. The front of the cylinder is marked “1089”.
Barrel Length: 5 1/2”
Sights / Optics: The front sight is a quarter round blade fixed to the barrel. The rear sight is a square groove in the top strap.
Stock Configuration and Condition: The grips are two-piece smooth walnut panels. There are a few minor nicks and scuffs. There are no chips or cracks. Overall, the grips are in Fine-Excellent condition.
Type of Finish: Nickel
Finish Originality: Original
Bore Condition: The bore is bright and the rifling is sharp. There is no erosion in the bore.
Overall Condition: This handgun retains about 98% of its metal finish. There are a few scattered minor scuffs and a few spots in the frontstrap where the finish is a little cloudy. Otherwise, there are only light handling marks. The screw heads are sharp. The markings are clear. Overall, this handgun rates in Excellent condition.
Mechanics: The action functions properly. The cylinder locks up with barely perceptible play on each chamber. We did not fire this handgun. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.
Box, Paperwork & Accessories: This revolver comes in a faux-wood cardboard Colt box with serial-matching label (the label-end ear has torn off but is included), manual and two-piece styrofoam inserts. The box has moderate wear with the label ear torn off and fraying and tears at edges and corners.
Our Assessment: In 1974, Colt quietly discontinued production of the single Action Army; this would be the second time they discontinued production of this glorious revolver. Luckily, the loyal fans of the SAA would not need to wait long as colt would bring back the SAA in 1976 as the “3rd Generation”. Changes were made but the basic SAA was the same, i.e. three standard barrel lengths of 4 ¾”, 5 ½” and 7 ½”, finishes of full nickel or blue, with color case hardened frame, and grips of hard rubber.
Some changes were incorporated in an effort by Colt to keep prices down. One new change was a pressed-in cylinder pin bushing instead of the removable ones used in 1st and 2nd Generation cylinders. Also, the ratchet at the rear of the cylinders was re-shaped, which also necessitated a different shape on the rotating hand. Additionally, for some unknown reason, the pitch of the barrel’s threads was changed from the 20 threads per inch (TPI) as used on 1st and 2nd Generation SAAs to 24 TPI for these new ones. Toward the end of 2nd Generation production Colt had begun using some investment cast parts, but the frames continued to be forged. The introductory caliber for 3rd Generation SAAs was .45 Colt, but other chamberings would soon follow, including .44 Special.
Everyone should have a Colt Single Action Army, and this would be a beauty to add to any collection. Manufactured in 1980, this revolver is in Excellent condition, appearing to have spent more time in its included box than out. With a 5 1/2? barrel, nickel finish and chambered for .44 Special, this is a classic Single Action Army chambered for a classic cartridge, as well as being a fairly scarce configuration. The pistol’s high condition will make it suitable for addition to a collection, but it should also make for a fun shooter that will draw some eyes at the range. Please see our photos and good luck!