WWII Inland Div. US M1 Carbine Matching M-1 U.S. .30 Semi Auto Rifle C&R
SOLD FOR: $2704
LSB#: 211214AL12
Make: Inland Division of General Motors. This rifle uses all Inland parts.
Model: M1 Carbine
Serial Number: 5138252
Year of Manufacture: July to September, 1944 (page 28 of Scott Duff’s book The M1 Carbine Owner’s Guide). Barrel Date: 4 – 44
Caliber: .30 Carbine
Action Type: Semi Auto, Detachable Magazine. There is NO magazine.
Markings: There is no import mark. The top of the receiver is marked “U.S. CARBINE / CAL. 30 M1” on the front and “INLAND DIV. / 5138252” on the rear. The top of the barrel is marked “INLAND MFD. DIV. / GENERAL MOTORS / 4 – 44” and “P”. The right rear of the trigger group is marked “INLAND” which is an Inland mark (page 78 of Craig Riesch’s book, U.S. M1 Carbines Wartime Production 7th Edition). The hammer is marked “HI” which is an Inland mark (page 89). The magazine release is marked “M” and “WI” which is an Inland mark (pages 100-101). The smooth push button safety is unmarked which is consistent with Inland and others (page 95). The inside of the operating slide is marked “PI” which is an Inland mark (page 65). The bolt is marked “1” and “OI” on the left lug which is an Inland mark (page 36). The front sight is marked “N” which is consistent with Inland and others (page 56). The Type I rear sight is marked “S” on the left which is consistent with Inland and others (page 29). The Type II barrel band is unmarked which is consistent with Inland and others (page 59). The interior of the handguard is marked “OI” which is an Inland mark (page 138). The sling well is marked “OI” which is and Inland mark (page 108-109). The right side of the butt is marked with a “crossed cannons” cartouche.
Barrel Length: Approximately 18 Inches
Sights / Optics: The front sight is a post set between two protective wings. The rear sight is a Type I dual flip up aperture assembly.
Stock Configuration & Condition: The stock has a pistol grip, Type II barrel band with sling loop, sling well, sling pass through, and a metal buttplate. The buttplate shows scrapes & oxidation. The wood shows various scrapes & scratches that have been oiled. The most prominent marks are on the left front of the forearm. The LOP measures 13 ? inches from the front of the trigger to the back of the buttplate. The stock rates in about Very Good Plus to Fine overall condition.
Type of Finish: Parkerized
Finish Originality: Original
Bore Condition: The bore is bright; semi bright at the muzzle. The rifling is sharp. There is some fouling in the grooves and at the muzzle which should clean up some. The bore shows an M.E. of 0.2.
Overall Condition: This rifle retains about 97% of its metal finish. The metal shows scuffs, small scrapes, and light handling marks. The barrel shows long thin scrapes and a few small scratches. The right side of the receiver & bolt show light thinning consistent with cycling. The markings are deep. Overall, this rifle rates in about Very Good Plus to Fine condition.
Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.
Box, Paperwork & Accessories: TThere is NO magazine.
Our Assessment: The M1 Carbine was developed and produced after WWII started. Over 6 million were made by a number of U.S. companies to assist with the all out war effort. The M1 Carbine was widely issued to U.S. Military Forces which numbered over 16 million during WWII. The M1 Carbine contributed greatly to U.S. efforts during WWII.
The Inland Manufacturing Division of General Motors was organized in 1922 for the manufacturing of steering wheels. During WWII Inland Division was one of many facilities that tooled up to manufacture M1 Carbines for the war effort. Inland produced the majority of WWII M1 Carbines, about 43%, and contributed greatly to the war effort. Inland M1 Carbines were used by millions of soldiers during WWII in numerous battles. If you see WWII footage that includes an M1 Carbine, it is most likely an Inland M1 Carbine.
This Matching Inland M1 Carbine was made back in 1944. It uses all Inland parts including its original “INLAND MFD. DIV. / GENERAL MOTORS” marked barrel. The rifle is in nice shape with a strong & bright bore. Both the metal and wood are marked making the rifle desirable to collectors. The markings include deep Inland stampings on the barrel and receiver. This Matching Inland M1 Carbine will add nicely to a WWII collection. Good luck.