Smith & Wesson S&W Model 657 .41 Magnum Stainless 8 3/8″ Revolver
SOLD FOR: $1065.99
LSB#: 211027DC17
Make: Smith & Wesson
Model: 657, The .41 Magnum Stainless
Serial Number: AJR6053
Year of Manufacture: Ca. 1986
Caliber: .41 Remington Magnum
Action Type: Single or Double Action Revolver with Swing-Out Cylinder
Markings: The left of the barrel is marked “SMITH & WESSON”, the right is marked “41 MAGNUM”. The sideplate is marked with the S&W monogram logo and the right of the frame is marked with the four-line marcas registradas address. The crane-cut is marked with the serial and model numbers, the butt of the grip frame is also marked with the serial number. The crane and sides of the grip frame have inspection marks.
Barrel Length: 8 3/8″
Sights / Optics: The front sight is a serrated ramped blade that is pinned to a serrated ramped base on the serrated rib on the barrel. The rear sight is a flat-topped square notch in a micrometer adjustable base screwed to the top strap.
Stock Configuration & Condition: The grip is a black rubber Hogue monogrip with finger grooves and their pebble texture. There are some scattered scuffs and rubs. The texturing is strong. There are no rips or tears. Overall, the grips are in about Fine condition.
Type of Finish: Stainless
Finish Originality: Original
Bore Condition: The bore is bright with sharp rifling. There is no erosion in the bore.
Overall Condition: This handgun retains about 97% of its metal finish. There are some scattered scuffs and draglines, some have caused smooth spots. Some of the most noticeable scuffs are on the trigger guard, left side of the frame at the cylinder release, and on the cylinder. There are a couple hairline scratches, the most noticeable are on the cylinder. The cylinder has a thin turn line. The screw heads are mostly sharp, some have light tool marks with serviceable slots. The markings are clear. Overall, this handgun rates in about Fine condition.
Mechanics: The action functions correctly. The cylinder lockup shows barely perceptible play with the trigger depressed. The double-action trigger is smooth and the single-action trigger is crisp. We did not fire this handgun. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.
Box, Paperwork & Accessories: None.
Our Assessment: This is a S&W Model 657 .41 Magnum Stainless revolver that was made around 1986. It has a 8 3/8” barrel, a tough stainless finish, adjustable target sights, target hammer, target trigger and a durable Hogue Monogrip. The .41 Rem. Mag. was conceived by Elmer Keith and was originally intended for hunting and law enforcement use as a bridge between the .357 and .44 Magnum calibers. He envisioned two different loads: a hot load for hunting and a milder police load. When used with heavy hunting loads, the .41 Magnum offers a flatter trajectory than the .44 Magnum, and can nearly equal its muzzle energy, especially in the new loadings available from Cor-Bon and Buffalo Bore. The .41 Magnum never caught on to the same extent as the smaller .357 or larger .44 Magnum, making these revolvers more scarce than the Models 627 and 629. This particular example is in Fine condition retaining a great bore and strong mechanics. This would be a great handgun for silhouette shooting or handgun hunting. This is a great find for the S&W collector or .41 Magnum fan. Please see our photos and good luck!