Winchester Parker Repro DHE Grade 20 GA SXS Side by Side Shotgun, 1984-1989

SOLD FOR: $4511

LSB#: 210317GB23

Make: Olin-Kodensha, in Japan, for Winchester, Contracted by Reagent Chemical & Research

Model: Parker DHE Grade

Serial Number: 00634

Year of Manufacture: 1984-1989

Gauge: 20 Gauge, 2 ¾” & 3″ Shells

Action Type: Side by Side, Box Lock, Top Break, Single-Selective Trigger Shotgun with Ejectors

Markings: The left barrel is marked “Parker Reproductions by WINCHESTER – 20 GAUGE, 2 ¾” & 3″ / EAST ALTON, IL. U.S.A.”, the right barrel is marked “MADE IN JAPAN” The left barrel flat is marked “FULL”, “00634”, with an ovalled “WP” proof, the right is marked “MOD” and each is marked “OVERLOAD / PARKER REPRODUCTION / PROVED”. The bottom of the barrel lugs are marked “I / 0”. The left side of the barrel lug is marked “D GRADE 20 GA. / FOR 3” SHELLS”. The top of the forend bracket is marked with the serial number. The water table is marked “DHE / 00634”, the sides of the frame have a pointer and setter, with to-spec Parker D-grade scroll engraving; the underside of the frame has D-engraving and “PARKER” with birds in flight; the underside, by the trigger selector, is marked “R” and “L”. The upper tang is marked “SAFE”, the lower tang has the serial number. The skeleton butt plate is scroll engraved, the belly of the butt stock has a metal oval insert that has not been engraved.

Barrel Length: 28”, with solid, concave, tapered rib.

Choke: The left barrel is Full, the right Modified, both fixed.

Sights / Optics: This shotgun is mounted with a brass bead at the muzzle; the top of the rib is milled in a wave-like pattern for glare reduction, stopping at a scribed line just short of the muzzle.

Weight: 6 lb. 10.9 oz.

Stock Configuration & Condition: The stocks are a two piece fancy walnut set. The splinter forend has case-colored D-grade engraved metal fixtures and wrap-around checkering, to the original Parker specifications. The butt stock has a straight grip and a metal oval insert on the belly which has not been engraved. The stocks have a few scattered minor scuffs and faint scratches. Otherwise, there are only light handling marks. The checkering is sharp. There are no chips or cracks. The drop at comb is 1 3/8”, drop at heel is 2 1/8”. The LOP measures 14 1/2” from the front of the trigger to the back of the skeletonized metal butt plate. The plate has no notable wear or damage. The back of the stock is finely checkered, showing no notable wear or damage. The stocks rate in Fine-Excellent overall condition.

Type of Finish: Rust-Blued & Case Colored, with Grade D Engraving.

Finish Originality: Original

Bore Condition: The bores are bright. There is no erosion.

Overall Condition: This shotgun retains about 98% of its metal finish. Each barrel has a short line of faint wear on the outside near the muzzle. The water table shows minor operational wear. Otherwise, there are only light handling marks. The screw heads are sharp. The markings are crisp. Overall, this shotgun rates in Excellent condition.

Mechanics: The action functions correctly. The shotgun features a crisp single selective trigger, independent ejectors, an exceptionally tight action lockup and presents spectacular balance. The shotgun’s action automatically returns to “SAFE” when the action is opened. We have not fired this shotgun. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: Included is a tan leather bound hard trunk case with canvas and leather cover. The exterior of the case has been well protected by the cover, showing little in the way of wear on the exterior. The inside is lined with green felt, with component separators and two holes to hold 20 Gauge snap caps. The interior has some light wear from its contents. Overall the case is in about Fine-Excellent condition. Also included is a Parker Reproductions manual, keys for the case, and two snap caps.

Our Assessment: In 1984, Winchester was contracted by Reagent Chemical & Research, Inc. to manufacture a new Parker shotgun. The new SxS was a DHE model, available in 20 and 28 ga. initially. These models were fabricated in Japan to original Parker specifications, and the reproduction was so authentic that parts are interchangeable with the late Parkers made by Remington in Ilion, NY, with the exception of one screw. The original D Grade Parker used as the pattern gun unknowingly had a single replacement screw, which was meticulously reproduced by Kodensha on all of the Parker Reproductions. Tom Skeuse, the founder of Reagent and the driving force behind the Parker Reproductions project, would only find out later that this one screw was not original. On Sept. 17, 1999, a flood destroyed all remaining inventory, including parts and most of the factory records. This 20 gauge DHE Reproduction is in Excellent condition and appears to have spent more time inside the included leather bound trunk case than outside. The to-specification D grade engraving looks exceptional with the vibrant case coloring retaining marvelous tone variation. The shotgun has a straight grip, single selective trigger, return-to-safe feature upon opening the action and has independent ejectors. The fit and finish of this shotgun is truly something to behold. Whether you’re a Winchester or Parker collector or just want one of the finest 20 gauge doubles made, this is a great addition to any safe in America. Please see our pictures and good luck!

Winchester Parker Repro DHE Grade 20 GA SXS Side by Side Shotgun, 1984-1989
Winchester Parker Repro DHE Grade 20 GA SXS Side by Side Shotgun, 1984-1989