Winchester Parker Repro DHE Grade 16 GA SXS Side by Side Shotgun, 1984-1989

SOLD FOR: $5836.99

LSB#: 210317GB12

Make: Olin-Kodensha, in Japan, for Winchester, Contracted by Reagent Chemical & Research, Barrels made by Krieghoff to fit a 20 Gauge Frame

Model: Parker DHE Grade

Serial Number: 20-04962

Year of Manufacture: 1984-1989

Gauge: 16 Gauge, 2 ¾” Shells

Action Type: Side by Side, Box Lock, Top Break, Single-Selective Trigger Shotgun with Ejectors

Markings: The left barrel is marked “Parker Reproduction 16 GAUGE 2 3/4″ 70MM”, the right barrel is marked “MADE IN GERMANY” The left barrel flat is marked “M” and “KRIEGHOFF / ULM”, the right is marked “IC” with german proof marks, “394” and “328”. The bottom of each barrel is marked with a German proof and “16,8mm”. The bottom of the barrel lug is marked “0″. The top of the forend bracket is marked with “20-04962”. The water table is marked “DHE / 20-04962”, the sides of the frame have a pointer and setter, with to-spec Parker D-grade scroll engraving; the underside of the frame has D-engraving and “PARKER” with birds in flight; the underside, by the trigger selector, is marked “R” and “L”. The upper tang is marked “SAFE”, the lower tang has the serial number. The skeleton butt plate is scroll engraved, the belly of the butt stock has a metal oval insert that has not been engraved.

Barrel Length: 29”, with solid, concave, tapered rib.

Choke: The left barrel is Modified, the right Improved Cylinder, both fixed.

Sights / Optics: This shotgun is mounted with a brass bead at the muzzle and a smaller brass mid-bead; the top of the rib is milled in a wave-like pattern for glare reduction, stopping at a scribed line just short of the muzzle.

Weight: 6 lb. 10.1 oz.

Stock Configuration & Condition: The stocks are a two piece fancy walnut set. The beavertail forend has case-colored D-grade engraved metal fixtures and wrap-around checkering, to the original Parker specifications. The butt stock has a straight grip and a metal oval insert on the belly which has not been engraved. The stocks have a few scattered light nicks and scratches. There is a repaired crack on the top-right edge of the forend at the front. The checkering is sharp. There are no chips. The drop at comb is 1 3/8”, drop at heel is 2 1/8”. The LOP measures 14 1/8” from the front of the trigger to the back of the skeletonized metal butt plate. The plate has faint wear at the heel and toe. The back of the stock is finely checkered, showing no notable wear or damage. The stocks rate in Fine overall condition as repaired.

Type of Finish: Rust-Blued & Case Colored, with Grade D Engraving.

Finish Originality: Original

Bore Condition: The bores are bright. There is no erosion.

Overall Condition: This shotgun retains about 97% of its metal finish. The barrels have a few light marks and a couple of spots of minor surface oxidation on the bottom near the muzzle. The action shows minor operational wear. Otherwise, there are only light handling marks. The screw heads are sharp. The markings are crisp. Overall, this shotgun rates in Fine-Excellent condition.

Mechanics: The action functions correctly. The shotgun features a crisp single selective trigger, independent ejectors, an exceptionally tight action lockup and presents spectacular balance. The shotgun’s action automatically returns to “SAFE” when the action is opened. We have not fired this shotgun. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: In 1984, Winchester was contracted by Reagent Chemical & Research, Inc. to manufacture a new Parker shotgun. Tom Skeuse, Reagent’s founder, was the driving force behind the project, arranging production at Kodensha and negotiation the use of the Parker name with Remington, overseeing production start-up and even buying a hardwood company in California to supply high-quality walnut for the stocks. The new SxS was a DHE model, available in 20 and 28 ga. initially. These models were fabricated in Japan to original Parker specifications, and the reproduction was so authentic that parts are interchangeable with the late Parkers made by Remington in Ilion, NY. Skeuse was also responsible for arranging with Krieghoff to fit approximately 500 sets of 16 Gauge barrels to the DHE 20 Gauge frame. This is one such example of a 16 gauge DHE Reproduction. The to-specification D grade engraving looks exceptional with the vibrant case coloring retaining marvelous tone variation. The shotgun has a single selective trigger, return-to-safe feature upon opening the action and has independent ejectors. The fit and finish of this shotgun is truly something to behold. Whether you’re a Winchester or Parker collector or just want one of the finest 16 gauge doubles made, this is a great addition to any safe in America. Please see our pictures and good luck!

Winchester Parker Repro DHE Grade 16 GA SXS Side by Side Shotgun, 1984-1989
Winchester Parker Repro DHE Grade 16 GA SXS Side by Side Shotgun, 1984-1989